Power Supplies

Our range of mains input power supplies consists of four different units each having different output power ratings. All have current limiting short circuit output protection and are housed in compact DIN rail mounting enclosures.

10W and 30W Isolated Mains Power Supply Unit

The power supply is a mains input, DC output DIN rail mounted power supplies. A wide range (90 to 264Vac) as standard. All outputs are protected by current limiting, ensuring short circuit proof operation. 90 to 264 Vac Operation 10W or 30W Output Short Circuit Protected Safety to UL1310 Class 2 Range of Output Voltages Available

Isolated Mains Power Supply Unit

The power supply is a mains input, DC output DIN rail mounted power supplies. A wide range (85 to 264Vac) mains voltage input is standard with an output voltage of 24Vdc as standard. All outputs are protected by current limiting, ensuring short circuit proof operation. 85 to 264 Vac Operation 15W, 30W, 50W & 100W Output Short Circuit Protected Safety to UL1310 Class 2 Range of Output Voltages Available

24VA Isolated Mains Power Supply Unit

The PSU range is a family of mains input, DC output DIN rail mounted power supplies. 115 and 230 Vac input options are available with an output voltage of 24Vdc as standard. All output are protected by current limiting, ensuring short circuit proof operation. 90 to 260 Vac Operation 24W Output Short Circuit Protected Safety to EN 61010-1 Range of Output Voltages Available

15W DC-DC Converter

The DC15 DC-DC Converter accepts a 24V dc supply and generates an isolated +/- 12Vdc voltage with an available output current of up to 625mA. The unit is typically used to provide a clean, isolated 24Vdc auxiliary power supply for panel based systems. In this case the output 0V terminal can be left disconnected, using the output +ve and -ve instead. Gives Isolated +/- 12Vdc or 24Vdc supply from non-isolated input Isolation to 500Vdc Compact DIN-Rail Mounting Full Input / Output Protection Other Voltage Options Available

 

 

DC15 dc-dc converter

DSP 10W-30W power supply

DPP isolated power supply

Psu24 isolated power supply

See also
Signal Conditioners Signal converters can be used to convert multiple 4-20ma analogue input signals into a single or multiple isolated outputs.
Industrial Ethernet Input/Output Modules providing High Speed & Accurate way of routing analogue and digital signals (mA,mV,V,Contact, RS232 & RS485) through Ethernet networks and onto the internet.
Wireless Systems and Sensors Wireless pressure, temperature, level and humidity sensors and systems based primarily on the Zigbee protocol and IEEE802.15.4 (wireless hardware standard).
Trip Amplifiers The family of Trip Amplifiers available range from a single setpoint loop powered device to a powered dual setpoint unit with isolated re-transmission and an LED display of inputs and setpoints.